节能型除铁过滤器在蒸汽凝结水回收系统中的应用

介绍了在复杂的工况条件下,回收总铁的蒸汽冷凝水技术,采用脉冲式气水复合反冲洗技术和高温烧结高分子陶瓷滤料的新型节能过滤器,解决了反冲洗水量大、滤料污染的问题,使处理后的冷凝水在品质和能耗方面有较高的经济价值.     

纺牵—步法中粗旦丙纶长丝沸水收缩率初探

在纺牵联合一步法纺丝机上研究了丙纶切片的熔融指数对纤维沸水收缩率的影响，发现熔融指数高的切片，其纤维的沸水收缩率变化大。沸水收缩率随热定型的温度升高而下降。沸水收缩率可根据用户提供中心值（Ｍ）通过实验确定，一般以Ｍ±１．５为宜。     

Aging Behavior of xPb(Fe2/3W1/3)O3· (1 –x)Pb(Fe1/2Nb1/2)O3 Ceramic

The aging behavior of a series of lead perovskite dielectrics with the compositions x Pb(Fe_2/3W_1/3)O₃·(1 – x )Pb(Fe_1/2-Nb_1/2)O₃, where 0 ≤ x ≤ 1, and the effect of dopants were studied. Below the Curie temperature ( T _c), the capacitance and the dissipation factor (tan δ) decrease approximately linearly with logarithmic time. The aging rate depends on the temperature difference, Δ T , between the aging temperature and T _c, and on the dopant concentration, but is independent of the measurement frequency between 1 and 1000 kHz. The maximum aging rate is about 3% per decade of time for capacitance and 5% per decade for tan δ at 1 mol% dopant concentration, and increases to 6.3% for capacitance and 8.5% for tan δ at 0.7 mol% dopant concentration. These results are consistent with an aging mechanism caused by changing ferroelectric domain structure with time, as proposed for BaTiO₃.     

浅谈一次盐水的工艺指标控制

介绍了一次盐水的各项工艺指标对生产的影响以及稳定控制这些指标的方法，强调了在生产中控制好一次盐水的工艺指标是影响产品质量及离子交换膜使用寿命的关键。     

Cooperative effect of crystallization temperature and NaF addition in the formation process and hydrothermal stability of MCM-48 mesoporous molecular sieve

The hydrothermal stability of MCM-48 was conveniently and effectively improved by increasing the crystallization temperature and directly adding NaF to the synthesis gel. The crystallization temperature varied from 373 K to 403 K. The influences of NaF addition, crystallization temperature and crystallization time on the formation process and hydrothermal stability of MCM-48 were systematically studied here to solve the problem of poor reproducibility. Results from XRD patterns indicated that the crystallization temperature and crystallization time were very critical factors for the improvement of the hydrothermal stability besides NaF addition. The formation process of MCM-48 was significantly accelerated and the pore structure ordering was also greatly improved by increasing the crystallization temperature and F⁻/Si ratio. A high hydrothermally stable MCM-48 mesoporous molecular sieve was obtained after being crystallized at 393 K for 36 h in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 4 days. However, only an amorphous product was obtained when the crystallization temperature was further increased to 403 K. Results from Si MAS NMR, N₂ adsorption isotherms, TEM, Raman spectra and XRD patterns manifested that the improved stability of MCM-48 was attributed to the high silicates condensation degree and the excellent pore structure ordering. The possible reason for the successful formation of hydrothermally stable MCM-48 sample by controlling the crystallization temperature, time and F⁻/Si ratio was explained here.     

阻燃硅橡胶的研制

通过测定硅橡胶试片的离火熄灭时间及燃烧速率来判定热硫化硅橡胶的阻燃性。结果表明，氢氧化铝对热硫化硅橡胶具有良好的阻燃效果；随着氢氧化铝用量的增加，硅橡胶的物理机械性能下降。通过对氢氧化铝进行表面处理，并与氯铂酸等阻燃剂配合，可制得符合美国UL-94V-0阻燃标准的硅橡胶制品。在本实验条件下的最佳配比为：100份混炼硅橡胶，45份氢氧化铝，50份氯铂酸(以铂质量计／10^-6)，2份乙炔炭黑及铁锡复合氧化物，制品拉伸强度大于5MPa。     

金属－PTC陶瓷复合材料研究

研究低Ｔ＿ｃＰＴＣＲ复合材料的制备工艺，测试所制成样品的阻温特性。通过样品Ｘ射线定性相分析，探讨该复合材料所表现的ＮＴＣ阻温特性机理。     

树脂传递模塑工艺中工艺参数对树脂-纤维界面的影响

本文系统研究了工艺参数对由树脂传递模塑成型的复合材料的拉伸强度和树脂-纤维界面的影响.这些参数包括注射压力和模腔/纤维毡的温度.在较低的注射压力和较高的成型温度下,纤维得到良好的浸润和粘结,成型复合材料的拉伸强度也较高.     

人工神经网络及其在窑炉动态温度场的模拟研究

本文阐述了人工神经网络的发展、基本原理以及前馈神经网络的反向传播学习算法，并应用单孢层网络进行了窑炉烧嘴温度场分布的仿真研究。结果表明。用非线性神经元网络模拟在窑炉温度场预测和控制方面是可行的。